P/N: Hinge roller lever Microswitch/electrical lever switch/limit micro switch/micro on off switch
Model No.: RV-166-1C25 (UL&CE certificate)

Characteristic:
1. Operation position (OP) precision is high
Operation position (OP) is 14.7+0.4mm. Pre travel (PT) is not more than 1.2mm (the data is the example for pin plunger type )
2. Shock resistance is good
Shock resistance : the Max is 1000m/s2
For the intensive shock , this type products has the limit design ,which can prevent the inside accessories from loose .
Rated data and performance
|
Item Type
|
RV-16
|
|
|
Allowable operating speed
|
0.1mm~1m/s(pin plunge type)
|
|
Allowable operating frequency
|
Mechanical is 600 operations/min
Electrical is 30 operations/min
|
|
Insulation resistance
|
100 mΩ min. (use the DC500V insulation resistance test)
|
|
Contact resistance (initial value )
|
Max. 15mΩ
|
|
|
Dielectric strength
|
Between the non-continuous terminals
|
1000VAC, 50/60HZ for 1min
|
|
Between non-current-carrying metal parts and each terminal
|
2000VAC, 50/60HZ for 1min
|
|
Between the ground and the each terminal
|
|
Vibration resistance
|
Malfunction
|
10-55HZ, 1.5mm double amplitude (contact gap is less than 1ms )
|
|
Shock resistance
|
less 294m/s2
|
|
Expected Life
|
Mechanical life (order OT)
|
100,000 operaions min. (frequency is 20 operations/min)
|
|
Electrical life(resistive load )
|
300,000 operations min. (frequency is 20 operations/min)
|
|
Ambient operation temperature & Ambient humidity
|
-25~+80(with no icing ),
85%RH max. (+5~35)
|
|
Contact material
|
AgNi alloy ; AgCdO alloy (not in the ROHS order )
|
|
Weight
|
Approx. 7.52g
|
Remark : switch operation with the low / high speed and shock , or used in the high temperature and more humidity , the life and the capability may be decleased because of the load capacity , so please consultation us freely
operating characteristics
|
Item
|
Characteristics
|
|
OF max.
|
1.23N {125gf}
|
|
RF min
|
0.14N {14gf}
|
|
PT max
|
4.0mm
|
|
OT min
|
1.6mm
|
|
MD max
|
1.5mm
|
|
OP
|
20.7±1.2mm
|
Remark 1: the status when the action characteristic is in A-direction ()
Remark 2: the dimension chart do not note the tolerance is ±0.4mm





